Clearing traffic on a specific vlan, Clearing igmp counters on vlans – Brocade TurboIron 24X Series Configuration Guide User Manual
Page 825
Advertising
Brocade TurboIron 24X Series Configuration Guide
791
53-1003053-01
Clear commands for IGMP snooping
The <vlan-id> parameter specifies the specific VLAN to clear the cache.
Clearing traffic on a specific VLAN
To clear the traffic counters on a specific VLAN, enter the following command.
TurboIron#clear ip multicast vlan 10 traffic
Syntax: clear ip multicast vlan <vlan-id> traffic
The <vlan-id> parameter specifies the specific VLAN on which to clear the traffic counters.
Clearing IGMP counters on VLANs
To clear IGMP snooping on error and traffic counters for all VLANs, enter the following command.
TurboIron#clear ip multicast counters
Syntax: clear ip multicast counters
Advertising