Virtual switch redundancy protocol (vsrp), Commands on switch c, Commands on switch d – Brocade TurboIron 24X Series Configuration Guide User Manual
Page 332
298
Brocade TurboIron 24X Series Configuration Guide
53-1003053-01
Virtual Switch Redundancy Protocol (VSRP)
TurboIron(config)#topology-group 1
TurboIron(config-topo-group-1)#master-vlan 2
TurboIron(config-topo-group-1)#member-vlan 30
TurboIron(config-topo-group-1)#member-vlan 40
Commands on Switch C
TurboIron(config)#vlan 2
TurboIron(config-vlan-2)#tag ethernet 1 to 2
TurboIron(config-vlan-2)#metro-ring 1
TurboIron(config-vlan-2-mrp-1)#name “Metro A”
TurboIron(config-vlan-2-mrp-1)#ring-interface ethernet 1 ethernet 2
TurboIron(config-vlan-2-mrp-1)#enable
TurboIron(config-vlan-2)#exit
TurboIron(config)#vlan 30
TurboIron(config-vlan-30)#tag ethernet 1 to 2
TurboIron(config-vlan-30)#tag ethernet 3
TurboIron(config-vlan-30)#exit
TurboIron(config)#vlan 40
TurboIron(config-vlan-40)#tag ethernet 1 to 2
TurboIron(config-vlan-40)#tag ethernet 4
TurboIron(config-vlan-40)#exit
TurboIron(config)#topology-group 1
TurboIron(config-topo-group-1)#master-vlan 2
TurboIron(config-topo-group-1)#member-vlan 30
TurboIron(config-topo-group-1)#member-vlan 40
Commands on Switch D
TurboIron(config)#vlan 2
TurboIron(config-vlan-2)#tag ethernet 1 to 2
TurboIron(config-vlan-2)#metro-ring 1
TurboIron(config-vlan-2-mrp-1)#name “Metro A”
TurboIron(config-vlan-2-mrp-1)#ring-interface ethernet 1 ethernet 2
TurboIron(config-vlan-2-mrp-1)#enable
TurboIron(config-vlan-2)#exit
TurboIron(config)#vlan 30
TurboIron(config-vlan-30)#tag ethernet 1 to 2
TurboIron(config-vlan-30)#tag ethernet 3
TurboIron(config-vlan-30)#exit
TurboIron(config)#vlan 40
TurboIron(config-vlan-40)#tag ethernet 1 to 2
TurboIron(config-vlan-40)#tag ethernet 4
TurboIron(config-vlan-40)#exit
TurboIron(config)#topology-group 1
TurboIron(config-topo-group-1)#master-vlan 2
TurboIron(config-topo-group-1)#member-vlan 30
TurboIron(config-topo-group-1)#member-vlan 40
Virtual Switch Redundancy Protocol (VSRP)
Virtual Switch Redundancy Protocol (VSRP) protocol provides redundancy and sub-second failover
in Layer 2 and Layer 3 mesh topologies. Based on the Virtual Router Redundancy Protocol
Extended (VRRP-E), VSRP provides one or more backups for a Layer 2 Switch or Layer 3 Switch. If
the active Layer 2 Switch or Layer 3 Switch becomes unavailable, one of the backups takes over as
the active device and continues forwarding traffic for the network.