Clearing vrrp or vrrpe statistics, Displaying cpu utilization statistics – Brocade TurboIron 24X Series Configuration Guide User Manual

Page 926

Advertising
background image

892

Brocade TurboIron 24X Series Configuration Guide

53-1003053-01

Displaying VRRP and VRRPE information

Clearing VRRP or VRRPE statistics

Use the following methods to clear VRRP or VRRPE statistics.

To clear VRRP or VRRPE statistics, enter the following command at the Privileged EXEC level or any
configuration level of the CLI.

Router1#clear ip vrrp-stat

Syntax: clear ip vrrp-stat

Displaying CPU utilization statistics

You can display CPU utilization statistics for VRRP and other IP protocols.

To display CPU utilization statistics for the previous one-second, one-minute, five-minute, and
fifteen-minute intervals, enter the following command at any level of the CLI.

rxed vrrp vrid not found error
count

The number of VRRP or VRRPE packets received by the interface that
contained a VRID that is not configured on this interface.

VRID statistics

rxed arp packet drop count

The number of ARP packets addressed to the VRID that were dropped.

rxed ip packet drop count

The number of IP packets addressed to the VRID that were dropped.

rxed vrrp port mismatch count

The number of packets received that did not match the configuration for the
receiving interface.

rxed vrrp ip address mismatch
count

The number of packets received that did not match the configured IP
addresses.

rxed vrrp hello interval mismatch
count

The number of packets received that did not match the configured Hello
interval.

rxed vrrp priority zero from
master count

The current Master has resigned.

rxed vrrp higher priority count

The number of VRRP or VRRPE packets received by the interface that had a
higher backup priority for the VRID than this Layer 3 Switch backup priority for
the VRID.

transitioned to master state
count

The number of times this Layer 3 Switch has changed from the backup state to
the master state for the VRID.

transitioned to backup state
count

The number of times this Layer 3 Switch has changed from the master state to
the backup state for the VRID.

TABLE 139

CLI display of VRRP or VRRPE statistics (Continued)

This field...

Displays...

Advertising