Attaching the spacer for borderless printing, Removing the spacer for borderless printing – Canon imagePROGRAF iPF610 User Manual
Page 165
Advertising
Handling rolls
Attaching the Spacer for Borderless Printing
If you use an A1 or A2 roll for borderless printing, insert the provided Spacer for Borderless Printing on
the Roll Holder.
Insert the protrusions (b) of the Spacer for Borderless Printing (a) into the holes (c) of the Roll Holder, as
shown.
Removing the Spacer for Borderless Printing
Pull out the Spacer for Borderless Printing from the Roll Holder, as shown.
Handling Paper 151
Advertising