Canon imagePROGRAF iPF610 - Manual (Page 380)

Printing banners or at other non-standard sizes
Printing on Non-Standard Paper Sizes (Mac OS X)
This topic describes how to print after registering “Custom Media Size” based on the following example. Here, you
will register a non-standard paper size named “430*430” in “Custom Media Size”.
• Document: Scanned image
• Page size: A square sheet (430×430 mm [16.9×16.9 in])
• Paper: Sheets ( Manual )
• Paper type: Plain Paper
• Paper size: A square sheet (430×430 mm [16.9×16.9 in])
Note
• The following procedures are based on Mac OS X 10.4. The method of setting up non-standard paper
sizes varies depending on the version of Mac OS X.
1.
Create the document in the application.
2.
Load the square paper (430×430 mm [16.9×16.9 in]) in the Top Paper Feed Slot.
3. Choose Page Setup from the application menu to display the Page Attributes dialog box.
4.
Select the printer in the B Format for list.
5.
Click Manage Custom Sizes in the C Paper Size list to display the Custom Page Sizes
dialog box.
6.
In Page Size, enter the height and width of the original. Here, enter “43.00 cm” in Height and
Width.
7.
In Printer Margins, enter “0.3” for the top and side margins and “2.3” for the bottom margin.
Here, measurements are entered in centimeters.
8.
Double-click Untitled in the list at left in the Custom Page Sizes dialog box and enter the
paper name-in this case, “430*430”.
9. Click OK to close the Custom Page Sizes dialog box.
10.
In the C Paper Size list, click the size of the original. In this case, click “430*430”, the size
you registered.
11.
Click F OK to close the dialog box.
12. Choose Print in the application menu.
366 Enhanced Printing Options