Canon imagePROGRAF iPF610 - Manual (Page 722)

Messages regarding paper
Paper jam.
Cause Corrective Action
A paper jam occurred in the printer during printing. Press the Load/Eject button and remove the jammed
paper.
(→P.144)
(→P.182)
You have loaded and printed on a roll when sheets
are selected as the paper source on the Control
Panel. Press the Load/Eject button, remove the roll, and
load a sheet. Otherwise, select the roll as the media
source on the Control Panel and reload the roll.
Cannot cut paper.
Cause Corrective Action
There are sheets left on the Output Tray. Remove the paper.
There is a foreign object by the Output Tray,
obstructing the Cutter Unit. Remove the foreign object.
You are not using the printer under the recommended
environmental conditions for the paper. Use the printer only where the recommended
environmental conditions for the paper are met.
Note that various environmental conditions are
recommended for various types of paper. For details
on the recommended environmental conditions for
paper, see “Types of Paper”. (→P.112)
You are using paper that is not compatible with
automatic cutting. Cut the roll manually.
(→P.135)
The Cutter Unit stops in the middle of cutting. Move the Cutter Unit to the left, and then remove the
roll paper. If the roll cannot be cut using the Cutter
Unit, cut the roll manually.
(→P.135)
In other cases, the Cutter Unit may be damaged. Contact your Canon dealer for assistance.
708 Error Message