Canon imagePROGRAF iPF610 - Manual (Page 206)

Handling sheets for paper feed slots
7. After Close top cover. is displayed, close the Top Cover and press the OK button.
The paper is held between the Platen and Back Cover as it is fed.
After the paper is advanced and the printer goes online, printing starts automatically.
If no print job has been received from the computer beforehand, the printer enters Standby mode.
8. Pull out the Output Tray Extension.
9.
After printing, the printer will temporarily stop advancing the paper while the trailing edge is still
in the rollers to prevent the sheet from dropping. Press the Load/Eject button to release the
sheet. After pulling it straight out, press the OK button. (→P.196)
Note
• Remove the printed document on the Output Tray after printing from the Front Paper Feed Slot. If
you print while a document is still there, the Front Tray Guides may become caught inside the Front
Paper Feed Slot. (→P.693)
192 Handling Paper