Canon imagePROGRAF iPF610 - Manual (Page 96)

Printing procedure
Basic Printing Workow
Printing procedure
Loading and Printing on Rolls
These are the basic steps for loading and printing on rolls.
Follow the steps below to switch to a new roll or a roll of a different type or width before printing.
Note
• If a sheet is loaded in the Tray, remove it before this procedure. (→P.152)
• Before printing banners or other large-format documents, spread a clean cloth or paper over the oor.
Otherwise, long sheets that touch the oor after printing may become dirty.
• If you will wait for the ink to dry after printing and simply eject the document, you can deactivate
automatic cutting and print a cut line instead. (→P.135)
1. Turn the printer on. (→P.19)
2.
Select roll paper as the paper source. (→P.120)
82 Basic Printing Workow