Canon imagePROGRAF iPF610 - Manual (Page 22)

Printer parts
Printer Parts
Printer parts
Front
Standard When the Cassette and Output Tray are removed
a. Top Cover
Open this cover to install the Printhead and remove any jammed paper from inside the printer, as
needed. (→P.11)
b. Paper Tray Cover
Open this cover to load sheets in the Tray. (→P.12)
c. Roll Feed Unit
Load rolls in this unit. You can also load sheets in this unit manually.
d. Roll Feed Unit Cover
Open this cover to load rolls. (→P.13)
e. Control Panel
Use this panel to operate the printer and check the printer status. (→P.16)
f. Output Tray
Printed documents are ejected into the output tray.
g. Output Tray ( Front Paper Feed Slot )
All printed documents are ejected to the output tray. Also, use this slot when loading heavyweight
paper. (→P.12)
h. Vertical Paper Guides
Raise the guides before printing on rolls to prevent paper jams. The guides will support the paper after
ejection. Lifting the guides when printing from the Front Paper Feed Slot will automatically raise the
Front Tray Guides, making it easier to load paper in the Front Paper Feed Slot.
i. Output Tray Extension
An extension to prevent ejected paper from falling to the oor. Pull out the extension to match the
paper size before printing.
8 Printer Parts