Canon imagePROGRAF iPF610 - Manual (Page 714)

Messages regarding paper
Messages regarding paper
Paper Mismatch
Cause Corrective Action
You printed a test pattern for printer adjustment on
several sheets, but sheets of different types or sizes
of paper were used. When printing a test pattern, use sheets of the same
type and size of paper.
The paper settings for the cassette on the printer do
not match the settings in the printer driver. Adjust both settings so that they match and try
printing again.
Papr Type Mismatch
Cause Corrective Action
Make sure the same type of paper is specied on the
printer as in the printer driver.
(→P.82)
(→P.89)
(→P.87)
Follow these steps to ensure the paper type matches
on the printer and in the printer driver.
1. Hold down the Stop button for a second or more
to cancel printing.
2. Either change the type of paper specied in the
printer driver settings or replace the loaded paper
and change the paper type setting on the printer.
The paper type as specied on the printer does not
match the type specied in the printer driver.
Press the Online button to resume printing.
However, this may cause a paper jam or printing
problem.
*Printing will continue if you have set Detect Mismatch to Warning or None.
700 Error Message