Canon imagePROGRAF iPF610 - Manual (Page 460)

Printing CAD Drawings
8.
After conrming that E Easy Settings is selected, click CAD (Line Drawing) or CAD
(Monochrome Line Drawing ) in the F Print Target list.
Note
• You can check the settings values selected in the F Print Target list by clicking G View set.
9. Access the Finishing pane.
10.
Click Roll Paper in the A Media Source list.
11. Specify additional printing conditions.
For details on available printing conditions, see “Printer Driver Settings (Mac OS 9)”. (→P.534)
12.
Conrm the print settings, and then click N Print to start printing.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Mac OS 9)”. (→P.535)
446 Enhanced Printing Options