Canon imagePROGRAF iPF610 - Manual (Page 512)

Windows
Color Settings Sheet: Color (Windows)
In general, make any needed adjustments to the color of documents in the application used to create them.
However, if the color tone as printed is not as you expected, you can also adjust the color in the printer driver.
Color Adjustment : color
If the color tone as printed is not as you expected, you can adjust it on the Color Adjustment sheet.
Note
• To display the Color Adjustment sheet, on the Main sheet, click Color Settings by Color Mode in
Advanced Settings. (→P.475)
Setting Item Description
A Preview The image at left is updated to reect any changes you make to setting
items on the sheet, enabling you to check the results of adjustment.
B Original The image at right shows the original state before adjustment. You can
compare it to the Preview image.
C Cyan
D Magenta
E Yellow
Correct color tones by adjusting the levels of each color.
F Brightness Adjust the overall image brightness as desired. You can adjust the
brightness if the printed document is lighter or darker than the original image
(that is, the original photo that was scanned or the original graphic as it
appears on the computer screen).
G Contrast Adjust the contrast of the darkest and lightest portions relative to each other,
as desired. Increasing the Contrast makes images sharper, and reducing
the Contrast softens images.
H Saturation Adjust the color intensity as desired. Increasing the Saturation setting
makes colors more vivid, and reducing the Saturation makes colors more
subdued.
I Gray Tone Adjustment Adjust the color tone of grays as desired. Choose Cool Black (tinged with
blue), Warm Black (tinged with red), and so on.
498 Software