Canon imagePROGRAF iPF610 - Manual (Page 214)

Output Stacker
Output Stacker
Using the Output Stacker
The Output Stacker can be used in two positions, as shown.
Regular position
Extended position
Use the Output Stacker in the normal position.
For some types of media, you can use the stacker in the extended position. Squeeze the wires of Basket
Wire #2 (a) and pull them toward the front (b). Fasten the Velcro Tape of the Basket Band in the middle of
Basket Rod #2 (c) to put the stacker in the extended position. This position enables printed documents to be
removed more easily.
For information on the position for easy removal, refer to the Paper Reference Guide. (→P.112)
Important
• The Output Stacker can hold one sheet. When printing multiple pages, remove each sheet after it
is printed.
200 Handling Paper