Printing banners or at other non-standard sizes, Fit roll paper width – Canon imagePROGRAF iPF610 User Manual
Page 374
Printing banners or at other non-standard sizes
Printing banners or at other non-standard
sizes
Printing Vertical or Horizontal Banners (Large-Format
Printing)
You can create vertical or horizontal banners by printing originals that are in banner format on rolls.
Originals created in Microsoft Word or other applications in your preferred size can be enlarged to ll the width
of roll paper by completing simple printer driver settings.
Fit Roll Paper Width
You can easily create vertical or horizontal banners by automatically enlarging or reducing originals to t the
full width of rolls.
Note
•
The maximum supported roll length is 18.0 m or 19.7 yd (when printing in Mac OS X).
For instructions on printing vertical or horizontal banners, refer to the following topics, as appropriate for
your computer and operating system.
•
Printing Vertical or Horizontal Banners (Large-Format Printing; Windows) (→P.371)
•
Printing Vertical or Horizontal Banners (Large-Format Printing; Mac OS X) (→P.375)
•
Printing Vertical or Horizontal Banners (Large-Format Printing; Mac OS 9) (→P.378)
Important
•
Before printing, check how much of the roll paper is left. If you have activated automatic detection of the
remaining roll paper, a warning message is displayed when there is not enough roll paper left.
•
If not much ink is left, prepare replacement ink tanks.
•
To print at a higher level of quality, in the printer driver, choose High or Highest in Print Quality, and
choose Unidirectional Printing as the direction of printing.
360 Enhanced Printing Options