Canon imagePROGRAF iPF610 - Manual (Page 728)

Messages regarding printheads
Messages regarding printheads
Cannot adjust printhead.
Cause Corrective Action
The Printhead nozzles are clogged. Follow the steps below to check the nozzles.
1. Print a test pattern to check the nozzles.
(→P.625)
2. Clean the Printhead if the nozzles are clogged.
(→P.626)
Highly transparent lm is loaded that cannot be used
for Printhead adjustment. We recommend using a type of paper that you often
use, other than lm, for Printhead adjustment.
(→P.599)
Cannot adjust band.
Cause Corrective Action
The Printhead nozzles are clogged. Follow the steps below to check the nozzles.
1. Print a test pattern to check the nozzles.
(→P.625)
2. Clean the Printhead if the nozzles are clogged.
(→P.626)
Highly transparent lm is loaded that cannot be used
for feed amount adjustment. Adjust the feed amount manually.
(→P.607)
PHead needs cleaning.
Cause Corrective Action
The Printhead nozzles are clogged. Specify Printhead cleaning options. (→P.626)
If the message is still displayed after Head Cleaning
B, contact the Canon dealer for assistance.
714 Error Message