Canon imagePROGRAF iPF610 - Manual (Page 677)

Cannot print over a network
Cannot print over a NetWare network
Cause Corrective Action
The printer’s NetWare settings are not congured
correctly. Make sure the printer’s NetWare settings are
congured correctly. In particular, make sure a valid
frame type is selected. For details, see “Conguring
the Printer’s NetWare Network Settings”. (→P.572)
The computer you are trying to print from is not
congured correctly. Make sure the computer’s NetWare settings are
congured correctly. For details, see “Conguring
NetWare Network Settings”. (→P.581)
The NetWare server and services are not congured
correctly. Check the following points.
1. Make sure the NetWare le server is running.
2. Make sure there is enough free disk space on the
NetWare le server. Insufcient disk space may
prevent you from processing large print jobs.
3. Start NWADMIN or PCONSOLE and conrm that
the print service is congured correctly and the
print queue is available.
4. If data transmission to a printer on another subnet
fails, deactivate NCP burst mode in that printer’s
network protocol settings.
5. If the printer is used in queue server mode, specify
“Other/Unknown” as the printer type.
Troubleshooting 663