Canon imagePROGRAF iPF610 - Manual (Page 312)

Printing enlargements or reductions
7. In the C Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
8.
Select the print target in the F Print Target list.
9. Access the Finishing pane.
10. Click Roll Paper in the A Media Source list.
11.
Make sure the width of the loaded roll is displayed in the B Roll Paper Width list-in this case, 16
in. (406.4mm).
Note
• If the width of the loaded roll is not displayed in B Roll Paper Width, click L Printer on the Main
pane and update the printer information.
298 Enhanced Printing Options