Canon imagePROGRAF iPF610 - Manual (Page 658)

Cleaning the Printer
Cleaning Inside the Top Cover
Clean inside the Top Cover about once a month to maintain better printing quality and help prevent problems.
Also clean inside the Top Cover in the following situations to ensure optimal operation.
• If the printed surface or the underside of paper is dirty after printing
• After you have used up a roll
• After borderless printing
• After printing on small paper
• After printing on paper that generates a lot of cutting debris
• If you have replaced the roll
• After printing on paper that generates a lot of paper dust
Important
• If the Platen inside the Top Cover becomes dirty, it may soil the underside of paper. We recommend
always cleaning the Platen after borderless printing or printing on small paper.
• If the Output Tray is dirty, it may soil the edge of the paper when the paper is cut. We recommend
cleaning the Output Tray even if it does not appear dirty, because it may actually be covered with
paper dust.
1.
Press the Menu button to display MAIN MENU.
2.
Press ▲ or ▼ to select Maintenance, and then press the ► button.
3. Press ▲ or ▼ to select Clean Platen, and then press the ► button.
4.
Press ▲ or ▼ to select Yes, and then press the OK button.
5. Open the Top Cover.
644 Maintenance