Canon imagePROGRAF iPF610 - Manual (Page 88)

Printer Specications
Printer Specications
Specications
Important
• This information is subject to change as the printer is updated.
• The following values may vary depending on the operating environment.
Printer
Power supply 100-120 V AC (50/60 Hz), 220-240 V AC (50/60 Hz)
In operation 100 W max.
Sleep mode 100-120 V: 5 W max.
(10 W max. when an IEEE 1394 (FireWire) expansion board
is installed.)
220-240 V: 6 W max.
(11 W max. when an IEEE 1394 (FireWire) expansion board
is installed.)
Power consumption
Off 1 W max. (*1)
Operating noise Approx. 52 dB (A) max.
Temperature 15-30°C (59-86°F) Operating
environment
Humidity 10-80%, non-condensing
Printer only 997Ч810Ч344 mm (39.3Ч31.9Ч13.5 in) Dimensions (W × D
× H)
With stand 999Ч981Ч990 mm (39.3Ч38.6Ч39.0 in)
Printer only 55 kg (121.3 lb) Weight
(not including the
Printhead and Ink
Tank )
With stand 72 kg (158.7 lb)
Printer only 1,297Ч1,910Ч644 mm (51.1Ч75.2Ч25.4 in) Space required for
installation (*2)
With stand 1,297Ч2,081Ч1,285 mm (51.1Ч81.9Ч50.6 in)
Applicable standards International Energy Star Program, Law on Promoting Green
Purchasing, GPN, RoHS, The Eco Declaration, WEEE, U.S.
presidential directives
*1: The printer uses a trace amount of power even when turned off. To stop all power consumption,
turn off the printer and unplug the power cord.
*2: Normally, you will need to ensure an unobstructed space of 800 mm (31.5 in) in front of the printer, 300
mm (11.8 in) behind, 150 mm (5.9 in) on both sides, and 300 mm (11.8 in) above the printer. Only
when printing from the Front Paper Feed Slot, leave 1,100 mm (43.3 in) of unobstructed space in front
of the printer and 700 mm (27.6 in) behind it.
74 Printer Parts