Canon imagePROGRAF iPF610 - Manual (Page 670)

Frequently Asked Questions
Troubleshooting
Frequently Asked Questions
Frequently Asked Questions
This section presents frequently asked questions and answers. To view more detailed explanations, click the
hyperlinks in the answer column.
Question Answer
How do I print on a roll? When printing on rolls, after loading the roll, specify
the paper type and length, both on the Control Panel
and in the printer driver.
ÞLoading and Printing on Rolls (→P.82)
How do I print manually? When printing manually, specify the paper type and
size in the printer driver, and then load the paper.
ÞLoading and Printing on Sheets in the Paper Feed
Slot (→P.89)
How do I print on sheets in the cassette? When printing from the cassette, load the paper, and
then complete the printer driver settings for the paper
type and size.
ÞLoading and Printing on Sheets in the Cassette
(→P.87)
How do I switch between printing on a roll and
printing manually? You can switch between manual and auto paper feed
methods by pressing the Feeder Selection button.
ÞSelecting the Roll as the Paper Source (→P.120)
ÞSelecting the Tray as the Paper Source (→P.161)
ÞSelecting the Cassette as the Paper Source
(→P.160)
How do I change the paper type or size? Specify the type and size of paper, both on the
Control Panel and in the printer driver.
• Specifying it in the Printer Driver
ÞSpecifying Paper in the Printer Driver (→P.658)
• Specifying it on the Control Panel
Selecting the paper type
ÞSelecting the Paper Type (Roll) (→P.130)
ÞSelecting the Paper Type (Tray) (→P.173)
ÞSelecting the Paper Type (Cassette) (→P.172)
Selecting the Paper Size
ÞSpecifying the Paper Length (Roll) (→P.131)
ÞSelecting the Paper Size (Tray) (→P.194)
ÞSelecting the Paper Size (Cassette) (→P.174)
How do I cut the roll paper after printing? You can wait until ink dries before cutting the roll, and
you can cut rolls at a desired position.
ÞSpecifying the Cutting Method for Rolls (→P.135)
656 Troubleshooting