Canon imagePROGRAF iPF610 - Manual (Page 725)

Messages regarding ink
Ink insufcient.
Cause Corrective Action
The ink level is low, so you cannot clean the
Printhead. Press the OK button and replace the Ink Tank that is
low with a new Ink Tank.
(→P.616)
The ink level is low, so there may not be enough ink
to nish printing. Press the OK button and replace the Ink Tank that is
low with a new Ink Tank.
(→P.616)
You can print until the ink runs out by pressing the
Online button. However, if the ink runs out during
printing, the following situation will occur depending
on the position of the leading edge when it passes
through the printer.
1. Ink tank is empty. is displayed and printing stops.
Press the Stop button to cancel printing, or press
the OK button, replace the ink tank that is low with
a new one, and continue printing. However, note
that because printing is paused, colors may be
slightly different. (→P.616)
2. Ink tank empty. Canceling printing of this
page. is displayed and printing stops. After the
paper is ejected, press the OK button and replace
the ink tank that is low with a new one. (→P.616)
Error Message 711