Canon imagePROGRAF iPF610 - Manual (Page 378)

Printing banners or at other non-standard sizes
4.
Make sure the Main sheet is displayed.
5.
In the A Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
6. After conrming that D Easy Settings is selected, click Scanned Image in the E Print Target
list.
7. Click the Page Setup tab to display the Page Setup sheet.
8.
Click O Size Options to display the Media Size Options dialog box.
9. Complete the following settings in the Media Size Options dialog box.
1. Enter a desired paper name in Custom Media Size Name. “430 mm Square” is used in this example.
2. Select mm or inch in Units.
3. Enter “430” [16.9 in] in both Width and Height.
Note
• If you select the Fix the Ratio of the Width to Height check box, after you enter a value in either
Width or Height, the other value will be automatically applied based on the original aspect ratio.
364 Enhanced Printing Options