Canon imagePROGRAF iPF610 - Manual (Page 576)

Network Setting
Conguring the IP Address on the Printer
You must congure the printer’s IP address before using the printer on a TCP/IP network.
The printer’s IP address is congured automatically when you install the printer driver following the instructions
in the Quick Start Guide.
Follow the steps below to congure the IP address by using imagePROGRAF Device Setup Utility, the
printer Control Panel, or ARP or PING commands, if the IP address is changed, or if you change the printer
connection mode to a network connection. For details on conguring the IP address, refer to the following
topics.
• Conguring the IP Address Using imagePROGRAF Device Setup Utility (→P.492)
• Conguring the IP Address Using the Printer Control Panel (→P.566)
• Conguring the IP Address Using ARP and PING Commands (→P.567)
Note
• We recommend conguring the printer’s IP address even if you will use the printer in other network
except for TCP/IP. Conguring the printer’s IP address enables you to use RemoteUI to congure the
network settings and manage the printer with a web browser.
For details on RemoteUI, see “Using RemoteUI”. (→P.570)
562 Network Setting