Canon imagePROGRAF iPF610 - Manual (Page 676)

Cannot print over a network
Cannot print over a TCP/IP network
Cause Corrective Action
The printer’s IP address is not congured correctly. Make sure the printer’s IP address is congured
correctly. For details, see “Conguring the IP
Address Using imagePROGRAF Device Setup
Utility”. (→P.492) or see “Conguring the IP Address
Using the Printer Control Panel”. (→P.566)
The printer’s TCP/IP network settings are not
congured correctly. Make sure the printer’s TCP/IP network settings are
congured correctly. For details, see “Conguring the
Printer’s TCP/IP Network Settings”. (→P.564)
The computer you are trying to print from is not
congured correctly. Make sure the computer’s TCP/IP network settings
are congured correctly. For details, see “Conguring
the Printer Driver Destination (Windows)”. (→P.582)
Cannot print over AppleTalk or Bonjour networks
Cause Corrective Action
The AppleTalk protocol is not enabled on the printer. Activate AppleTalk on the printer. For details,
see “Conguring the Printer’s AppleTalk Network
Settings”. (→P.587)
The computer you are trying to print from is not
congured correctly. Make sure the computer’s AppleTalk settings are
congured correctly. For details, see “Conguring
the Destination for AppleTalk Network (Macintosh)”.
(→P.589) or see “Conguring the Destination for
Bonjour Network (Macintosh)”. (→P.597)
The computer and printer are not on the same
network. Due to the nature of Bonjour, you cannot print if
the printer is on another network behind a router.
Make sure the computer and printer are on the same
network. For information about network settings, ask
your network administrator.
662 Troubleshooting