HP Color LaserJet CM4730 Multifunction Printer series - Manual (Page 115)

Configure a tray by using the Supplies Status menu
You can also configure the trays for type and size without a prompt from the MFP.
1. Scroll to and touch Supplies Status .
2. Touch the desired tray.
3. Touch Modify .
4. Select the size and type. If you select a custom type, use the numeric keypad to set the X dimension
and the Y dimension, and then touch
OK .
5. Touch OK .
6. Touch OK again.
Automatic media type sensing (auto sense mode)
The automatic media type sensor functions only when that tray is configured to Any Type. Configuring
a tray to any other type, such as Bond or Glossy, deactivates the media sensor in that tray.
The HP Color LaserJet CM4730 Series printers can automatically classify media into one of the following
categories:
● Plain
● Transparency
● Glossy
● Extra-heavy glossy
● Glossy film
● Heavy
● Light
Tray 1 sensing
Full sensing (default)
● The printer stops at each page to sense media type. This is the best mode for using mixed media
in a single print job.
Expanded sensing
● Each time the printer begins a print job, it stops the first page to sense the type.
● The printer assumes that the second and all subsequent pages are of the same media type as the
first page.
● This is the second-fastest mode, and is useful for using stacks of the same media type.
ENWW Configure trays 99