HP Color LaserJet CM4730 Multifunction Printer series - Manual (Page 354)

8. Reinsert the formatter pressure release tabs by squeezing them together and pushing them into
place.
9. Reconnect the power cable and interface cables, and turn the MFP on.
Enabling memory
If you installed a memory DIMM, set the MFP driver to recognize the newly added memory.
Enable memory for Windows 98 and Me
1. On the Start menu, point to Settings, and click Printers.
2. Right-click the printer and select Properties.
3. On the Configure tab, click More.
4. In the Total Memory field, type or select the total amount of memory that is now installed.
5. Click OK.
338 Appendix E Install memory and print server cards ENWW