HP Color LaserJet CM4730 Multifunction Printer series User Manual
Page 119
4.
Select the Device Settings tab.
5.
Use either of the following methods to select the stapler/stacker.
●
Scroll down to Automatic Configuration, select Update Now, and click Apply.
●
Scroll down to Accessory Output Bin, select HP 500 sheet stapler/stacker or HP 700 Sheet
3-bin Mailbox, and click Apply.
Configure the printer driver to recognize the 3-bin mailbox in Macintosh
1.
Open the Printer Center utility.
2.
Select HP Color LaserJet CM4730.
3.
On the File menu, click on Show Info (command, i).
4.
Select the Installable Options tab.
5.
Scroll to Accessory Output Bins and select HP 500 sheet stapler/stacker or HP 700 Sheet 3-
bin Mailbox.
6.
Click Apply Changes.
Select the 3-bin mailbox operating mode at the control panel
1.
Scroll to and touch
Administration
.
2.
Touch
Device Behavior
.
3.
Touch
MBM–3 Configuration
.
4.
Touch
Operation Mode
.
5.
Select the operation mode that you want to use.
Select the 3-bin mailbox operating mode in the printer driver
1.
Click the Start button, point to Settings, and then click Printers (for Windows 2000) or Printers
and Faxes (for Windows XP).
2.
Right-click the HP product icon, and then click Properties or Printing Preferences.
3.
Click the Device Settings tab.
4.
Perform one of the following actions:
For automatic configuration: under Installable Options, click Update Now in the Automatic
Configuration list.
-or-
For manual configuration: under Installable Options, select the appropriate operation mode in the
Accessory Output Bin list.
5.
Click OK to save the settings.
ENWW
Select the output bin 103