HP Color LaserJet CM4730 Multifunction Printer series User Manual

Page 219

Advertising
background image

4.

Locate the downloaded .RFU file for the MFP.

5.

Drag and drop the .RFU file onto the PORT1 icon in the browser window.

NOTE

The MFP turns off and then on automatically to activate the update. When the update

process is complete, a Ready message displays on the MFP control panel.

Use FTP to upgrade the firmware on a network connection

NOTE

The firmware update involves a change in the format of nonvolatile random-access

memory (NVRAM). Any menu settings that are changed from the default settings might return to
default settings and must be changed again if you want settings that are different from the
defaults.

1.

Take note of the IP address on the HP Jetdirect page. The HP Jetdirect page is the second page
that prints when you print the configuration page.

NOTE

Before upgrading the firmware, make sure that the MFP is not in Sleep mode. Also

make sure that any error messages are cleared from the control-panel display.

2.

Open an MS-DOS command prompt on your computer.

3.

Type:

ftp TCP/IP ADDRESS>

. For example, if the TCP/IP address is 192.168.0.90, type

ftp

192.168.0.90

.

4.

Go to the folder where the firmware file is stored.

5.

Press

Enter

on the keyboard.

6.

When prompted for the user name, press

Enter

.

7.

When prompted for the password, press

Enter

.

8.

Type

bin

at the command prompt.

9.

Press

Enter

. The message 200 Types set to I, Using binary mode to transfer files appears in

the command window.

10.

Type

put

and then the file name (for example, if the file name is CM4730mfp.efn, type

CM4730mfp.efn

).

11.

The download process begins and the firmware is updated on the MFP. This can take
approximately five minutes. Let the process finish without further interaction with the MFP or
computer.

NOTE

The MFP automatically turns off and then on again after processing the upgrade.

12.

At the command prompt, type:

bye

to exit the ftp command.

13.

At the command prompt, type:

exit

to return to the Windows interface.

ENWW

Upgrade the firmware 203

Advertising