HP Color LaserJet CM4730 Multifunction Printer series - Manual (Page 162)

Most process sample books will state which process standards were used to print the sample book. In
most cases they will be SWOP, EURO, or DIC. To get optimal color matching to the process sample
book, select the corresponding ink emulation from the MFP menu. If you cannot identify the process
standard, use SWOP ink emulation.
Printing color samples
To use the color samples, select the color sample that is the closest match to the desired color. Use the
sample’s color value in your software program to describe the object you wish to match. Colors may
vary depending on paper type and the software program used. For more details on how to use the color
samples, go to
http://www.hp.com/support/ljcm4730mfp .
Use the following procedure to print color samples at the MFP using the control panel:
1. Touch Information .
2. Touch Sample Pages/Fonts .
3. Touch CMYK Samples or RGB Samples . The pages will print.
146 Chapter 10 Using color ENWW