HP Color LaserJet CM4730 Multifunction Printer series User Manual
Page 136
Enable or disable automatic two-sided printing from the control panel
If you cannot adjust two-sided printing settings in your software program or printer driver, adjust them
on the control panel. The factory default setting is 1-sided.
CAUTION
Do not use two-sided printing when printing on labels. Serious damage can result.
NOTE
Changing settings for two-sided printing on the MFP control panel affects all print jobs.
Whenever possible, change settings for two-sided printing through your software program or
printer driver.
NOTE
Any changes made in the printer driver override settings made on the MFP control panel.
1.
Scroll to and touch
Administration
.
2.
Touch
Default Job Options
.
3.
Touch
Default Print Options
4.
Touch
Print Sides
.
5.
Touch
2-sided
.
6.
Touch
Save
.
Enable or disable automatic two-sided printing in the printer driver
CAUTION
Do not use two-sided printing when printing on labels. Serious damage can result.
NOTE
In the printer driver, Print on Both Sides (manually) is available only when the duplex
printing accessory does not support the type of print media being used.
120 Chapter 9 Print tasks
ENWW