Clean the mfp, Clean the outside of the mfp, Clean the touchscreen – HP Color LaserJet CM4730 Multifunction Printer series User Manual
Page 228: Clean the scanner glass
Clean the MFP
To maintain print quality, clean the MFP thoroughly every time you replace the print cartridge and
whenever print-quality problems occur.
WARNING!
Avoid touching the fusing area when cleaning the MFP. It can be hot.
CAUTION
To avoid permanent damage to the print cartridge, do not use ammonia-based
cleaners on or around the MFP except as directed.
Clean the outside of the MFP
●
Clean the outside of the MFP if it is visibly marked.
●
Use a soft, lint-free cloth dampened with water, or water and a mild detergent.
Clean the touchscreen
Clean the touchscreen whenever it is necessary to remove fingerprints or dust. Wipe the touchscreen
gently with a clean, water-dampened, lint-free cloth.
CAUTION
Use water only. Solvents or cleaners can damage the touchscreen. Do not pour or
spray water directly onto the touchscreen.
Clean the scanner glass
●
Clean the scanner glass only if dirt is visible, or if you are experiencing a decrease in copy quality,
such as streaking.
●
Clean the scanner glass by wiping it gently with a clean, slightly damp, lint-free cloth. Use an
ammonia-based surface cleaner only when a water-dampened cloth does not clean the scanner
glass.
CAUTION
Do not pour or spray liquids directly onto the scanner glass. Do not press hard on
the glass surface. (You could break the glass).
212 Chapter 15 Maintenance
ENWW