HP Color LaserJet CM4730 Multifunction Printer series - Manual (Page 137)

Enable or disable automatic two-sided printing in the Windows printer driver
1. Insert enough paper into one of the trays to accommodate the print job.
CAUTION Do not load media that is heavier than 105 g/m 2 (28 lb bond). This can jam the
MFP.
2. Open the printer driver.
3. On the Finishing tab, click Print on Both Sides.
4. Click OK.
Layout options for printing on both sides
The following are the four duplex orientation options. To select option 1 or 4, select Flip Pages Up in
the printer driver.
1 2 3 4
1. Long-edge landscape This layout is often used in accounting, data processing, and
spreadsheet programs. Every other printed image is oriented
upside-down. Facing pages are read continuously from top to
bottom.
2. Short-edge landscape Each printed image is oriented right-side-up. Facing pages are
read from top to bottom on the left page, and then from top to
bottom on the right page.
3. Long-edge portrait This is the default setting, and the most common layout used,
with every printed image oriented right-side-up. Facing pages
are read from top to bottom on the first page, and then from
top to bottom on the second page.
4. Short-edge portrait This layout is often used with clipboards. Every other printed
image is oriented upside-down. Facing pages are read
continuously from top to bottom.
Options for binding two-sided printing jobs
Before printing a two-sided document, use the printer driver to select the binding. Long-edge or book
binding is the conventional layout used in book binding. Short-edge or tablet binding is the typical
calendar binding.
ENWW Windows printer-driver features 121