HP Color LaserJet CM4730 Multifunction Printer series - Manual (Page 358)

6. Connect the network cable.
7. Reconnect the power cable, and turn the MFP on.
8. Print a configuration page. In addition to an MFP configuration page and a Supplies Status page,
an HP Jetdirect configuration page that contains network configuration and status information
should also print.
If it does not print, uninstall and reinstall the print server card to ensure that it is completely seated
in the slot.
9. Perform one of these steps:
● Choose the correct port. See the computer or operating system documentation for
instructions.
● Reinstall the software, choosing the network installation this time.
342 Appendix E Install memory and print server cards ENWW