Allied Telesis AT-S63 - Manual (Page 165)

AT-S63 Management Software Web Browser User’s Guide
Section II: Advanced Operations 165
inactive if it is not a part of any policies or if the policies are not
assigned to any ports.
Parent Traffic Class ID
The traffic class where the flow group is assigned.
Classifier List
The classifiers of the flow group.
4. Click Create.
The Create Flow Group page opens, as shown in Figure 57.
Figure 57. Create Flow Group Page
5. Configure the following parameters as necessary:
ID
Specifies the ID number for this flow group. A flow group must be
assigned a unique ID number. The range is 0 to 1023.
Description
Specifies the flow group description. A description can be up to 15
alphanumeric characters, including spaces.
DSCP
Specifies a replacement value to write into the DSCP (TOS) field of the
packets. The range is 0 to 63. A new DSCP value can be set at all
three levels: flow group, traffic class, and policy. A DSCP value