Displaying view table entries, Figure 101: snmpv3 user table tab (monitoring) – Allied Telesis AT-S63 User Manual
Page 260
Advertising
Chapter 17: SNMPv3
260
Section III: SNMPv3
The SNMPv3 User Table tab is shown in Figure 101.
Figure 101. SNMPv3 User Table Tab (Monitoring)
Displaying View
Table Entries
To display entries in the SNMPv3 View Table, perform the following
procedure:
1. From the Home page, select Monitoring.
The Monitoring System page is displayed with the General tab
selected by default, as shown in Figure 5 on page 38.
2. Select the SNMP tab.
The SNMP tab is shown in Figure 100 on page 259.
3. In the SNMPv3 section, click the button next to View View Table and
then click View at the bottom of the tab.
Advertising