Allied Telesis AT-S63 - Manual (Page 226)

Chapter 17: SNMPv3
226 Section III: SNMPv3
Note
The Context Match field is a read only field. The Context Match field
is always set to Exact.
9. In the Storage Type field, select one of the following storage types for
this table entry:
Volatile
Select this storage type if you do not want the ability to save an entry in
the Access Table. After making changes to an Access Table entry with
a Volatile storage type, the Save Config option is not displayed on the
Configuration menu.
NonVolatile
Select this storage type if you want the ability to save an entry in the
Access Table. After making changes to an Access Table entry with a
NonVolatile storage type, the Save Config option is displayed on the
Configuration menu. Allied Telesis recommends this storage type.
Note
The Row Status parameter is a read-only field in the web browser
interface. The Active value indicates the Access Table entry takes
effect immediately.
10. Click Apply to update the SNMPv3 Access Table.
11. To permanently save your changes, select the Save Config option in
the Configuration menu.