Allied Telesis AT-S63 - Manual (Page 175)

AT-S63 Management Software Web Browser User’s Guide
Section II: Advanced Operations 175
To modify a traffic class, perform the following procedure:
1. From the home page, select Configuration.
2. From the Configuration menu, select the Services option.
3. Select the Traffic Class tab.
The Traffic Class tab is shown in Figure 60 on page 170
4. Select the traffic class to be modified and click Modify.
The Modify Traffic Class page is shown in Figure 62.
Figure 62. Modify Traffic Class Page
5. Configure the parameters as necessary. For parameter definitions,
refer to “Configuring a Traffic Class” on page 170.
6. When you are finished modifying the parameters, click Apply.
The changes are immediately implemented in the traffic class.
7. To permanently save your changes, select the Save Config menu
selection.