Allied Telesis AT-S63 - Manual (Page 85)

AT-S63 Management Software Web Browser User’s Guide
Section I: Basic Operations 85
The Port Trunking tab is shown in Figure 22.
Figure 22. Port Trunking Tab (Configuration)
The tab displays the current static trunks in a table with the following
columns of information:
ID
The ID number of the trunk.
Name
The name of the trunk.
Type
The load distribution method. The possible settings are:
SA - Source MAC address (Layer 2)
DA - Destination MAC address (Layer 2)
SA/DA - Source MAC address /destination MAC address (Layer 2)
SI - Source IP address (Layer 3)
DI - Destination IP address (Layer 3)
SI/DI - Source IP address /destination IP address (Layer 3)
Ports
The ports of the trunk.