Displaying vlans, Figure 130: vlan tab (monitoring) – Allied Telesis AT-S63 User Manual
Page 325
Advertising
AT-S63 Management Software Web Browser User’s Guide
Secton V: Virtual LANs
325
Displaying VLANs
To display the current VLANs on a switch, perform the following
procedure:
1. From the Home page, select Monitoring.
2. From the Monitoring menu, select the Layer 2 option.
3. Select the VLAN tab.
The VLAN tab is shown in Figure 130.
Figure 130. VLAN Tab (Monitoring)
The upper part of the tab displays the following information:
VLAN Mode
The VLAN mode of the switch. Possible settings are:
User Configured - This mode supports port-based and tagged VLANs.
Multiple 802.1Q - The IEEE 802.1Q-compliant multiple VLAN mode.
Multiple - The non-IEEE 802.1Q-compliant multiple VLAN mode.
Advertising