Allied Telesis AT-S63 - Manual (Page 87)

AT-S63 Management Software Web Browser User’s Guide
Section I: Basic Operations 87
Note
Allied Telesis does not recommend using paired twisted pair ports
with GBIC or SFP slots in a port trunk. The operation of a port trunk
may be unpredictable if a paired port were to transition to the
redundant uplink status mode.
8. Click Apply.
The new port trunk is now active on the switch.
9. To permanently save your changes, select the Save Config option in
the Configuration menu.
10. Configure the ports on the remote device for port trunking.
11. Connect the cables to the ports of the trunk on the switch and on the
remote device.
The port trunk is ready for network operations.