Allied Telesis AT-S63 - Manual (Page 64)

Chapter 4: SNMPv1 and SNMPv2c
64 Section I: Basic Operations
Enabling or Disabling SNMP Management
To enable or disable SNMP management on the switch, perform the
following procedure:
1. From the Home page, select Configuration.
2. From the Configuration menu, select the Mgmt. Protocols option.
3. Select the SNMP tab.
The SNMP tab is shown in Figure 14.
Figure 14. SNMP Tab (Configuration)
4. Click the Enable SNMP Access checkbox to enable or disable SNMP
management. A check in the box indicates the feature is enabled,
meaning the switch can be managed from an SNMP management
station. No check indicates the feature is disabled. The default is
disabled.