Allied Telesis AT-S63 - Manual (Page 374)

Chapter 24: Encryption Keys, PKI, and SSL
374 Section VII: Management Security
Displaying the PKI Settings and Certificates
You can view the current PKI settings and certificates on the switch. To
configure the PKI settings and certificates, you must use the AT-S63
menus or command line interface. For more information about PKI, refer
to the AT-S63 Management Software Menus Interface User’s Guide.
To display the PKI settings and certificates, perform the following
procedure:
1. From the Home page, select Monitoring.
2. From the Monitoring menu, select the Mgmt. Security option.
3. Select the PKI tab.
The PKI tab is shown in Figure 153.
Figure 153. PKI Tab (Monitoring)
The upper section of the tab states the maximum number of
certificates the certificate database can store. The default value is 256
certificates. The lower section displays a table that lists the current
certificates in the database and contains the following columns of
information:
Name
The certificate name.
State
The state of the certificate, one of the following: