Allied Telesis AT-S63 - Manual (Page 264)

Chapter 17: SNMPv3
264 Section III: SNMPv3
The SNMPv3 Notify Table tab is shown in Figure 105.
Figure 105. SNMPv3 Notify Table Tab (Monitoring)
Displaying Target
Address Table
Entries
To display entries in the SNMPv3 Target Address Table, perform the
following procedure:
1. From the Home page, select Monitoring.
The Monitoring System page is displayed with the General tab
selected by default, as shown in Figure 5 on page 38.
2. Select the SNMP Tab.
The SNMP tab is shown in Figure 100 on page 259.
3. In the SNMPv3 section, lick the button next to View Target Address
Table and then click View at the bottom of the tab.