Allied Telesis AT-S63 - Manual (Page 372)

Chapter 24: Encryption Keys, PKI, and SSL
372 Section VII: Management Security
Displaying the Encryption Keys
To configure the encryption keys, you must use the AT-S63 menus or
command line interface. For more information about encryption keys, refer
to the AT-S63 Management Software Menus Interface User’s Guide.
To display the encryption keys, perform the following procedure:
1. From the Home page, select Monitoring.
2. From the Monitoring menu, select the Mgmt. Security option.
3. Select the Keys tab.
The Keys tab is shown in Figure 152.
Figure 152. Keys Tab (Monitoring)
The Keys tab displays a table that contains the following columns of
information:
ID
The identification number of the key.
Algorithm
The algorithm used in creating the encryption. This is always RSA -
Private.
Length
The length of the key in bits.
Digest
The CRC32 value of the MD5 digest of the public key.