Configuring authenticator port parameters – Allied Telesis AT-S63 User Manual
Page 355
Advertising
AT-S63 Management Software Web Browser User’s Guide
Section VI: Port Security
355
Configuring Authenticator Port Parameters
To configure authenticator port parameters, perform the following
procedure:
Note
The role of a port must be set to authenticator before the parameters
can be configured. For instructions, refer to “Setting Port Roles” on
page 352.
1. From the home page, select Configuration.
2. From the Configuration menu, select the Network Security option.
3. Select the 802.1x Port Access tab.
The 802.1x Port Access tab is shown in Figure 144 on page 352.
4. In the switch image, click the authenticator port to be configured. You
can configure more than one authenticator port at a time. The selected
port turns white.
5. Click Settings.
Advertising