Allied Telesis AT-S63 - Manual (Page 334)

Chapter 21: GARP VLAN Registration Protocol
334 Section V: Virtual LANs
Displaying the GVRP Port Configuration
To display the GVRP port configuration, perform the following procedure:
1. From the Home page, select Monitoring.
2. From the Monitoring menu, select the Layer 2 option.
3. Select the GVRP tab.
The GVRP tab is shown in Figure 134 on page 333.
4. In the View GVRP Parameters section, click View Port
Configuration.
5. Click View.
The GVRP Port Configuration page is shown in Figure 135.
Figure 135. GVRP Port Configuration Page
The GVRP Port Configuration page provides the following information:
Port Number
The port number.
Mode
The port mode, either Normal or None.