Allied Telesis AT-S63 - Manual (Page 399)

AT-S63 Management Software Web Browser User’s Guide
Section VII: Management Security 399
The table in the Management ACL List lists the existing ACEs on the
switch. The bottom portion is used to add entries, as explained in
“Creating an ACE” on page 400.
4. Click either Enable MGMT. ACL or Disable MGMT. ACL. The default
setting is disabled.
5. Click Apply.
The new status of the management ACL is immediately activated on
the switch.
Note
Your management session will immediately end and you will not be
able to reestablish it if you activate the feature without an ACE that
identifies your management station. To recover, establish a local
management session on the switch and deactivate the feature or
create an ACE that identifies the remote management station.
6. To permanently save your changes, select the Save Config option in
the Configuration menu.