Time interval between changing dosage thresholds – RADWAG WPW 60/H5/K Multifunctional Scales User Manual
Page 106
Advertising
DOSE. MODE
1
-
manual operation (after pressing
),
DOSE. MODE
2
-
automatic operation,
DOSE. MODE
3
-
„-” negative dosing (after tarring
and pressing
).
Return to weighing:
See 11.3.
24.7.2. Time interval between changing dosage thresholds
By setting <P7.4.2 DELAY> parameter users can set a delay time
between changing dosing thresholds.
Procedure:
• Enter
<P7 WORK MODES> and then:
- 106 -
Advertising
This manual is related to the following products: