Inscribing the unit mass to the database, Description of counting pieces / labelling – RADWAG WPW 60/H5/K Multifunctional Scales User Manual
Page 125
Caution:
The selected product has to have a declared unit mass.
You can inscribe it by editing a record from the database.
24.8.16. Inscribing the unit mass to the database
The unit mass can be described a unit mass the following way:
a) Estimate the unit mass (see 24.8.13 and 24.8.14),
b) Enter the assortment database
,
c) Select the product (using
),
d) Press
, in the lower line you can see:
e) Confirm the unit mass with
,
f) The unit mass is saved.
24.8.17. Description of counting pieces / labelling
Notice:
Before the labelling procedure please design and load the pattern of the
label into the terminal memory. Chapter 32.2 of the manual presents the
example of creating and downloading the label into the terminal memory
and setting printer basic parameters to cooperate with the scale.
Procedure:
• After sending the pattern of the label to the terminal memory please
start mode COUNTING PIECES according to chapter 24.8.12 of the
manual,
• Edit databases of: operators (
), assortment (
), universal
databases (
), contractors (
),
- 125 -