Choosing the counting pieces / labelling work mode, Setting the mass of single piece – RADWAG WPW 60/H5/K Multifunctional Scales User Manual
Page 121
Advertising
• Using the keyboard enter the amount of total sum labels
and confirm it with the key
.
Return to weighing:
See ch. 11.3
24.8.12. Choosing the counting pieces / labelling work mode
• Selecting
COUNTING PIECES is confirmed by
pictogram in the
upper right corner of the display.
24.8.13. Setting the mass of single piece
Procedure:
• Enter the COUNTING PIECES mode according
to chapter 24.8.12 of this manual:
- 121 -
Advertising
This manual is related to the following products: